TERRY Melody 1, Руководство по установке

Страница: 16 / 66

Terry Melody 1 - Installation Instructions - ED01050g
16
ref: ED01059c, dated: 29/01/2010
MELODY 1 INSTALLATION TEST CERTIFICATE
(PAGE2 OF 3)
B.2. Static Examination
a) Is all metalwork that encloses live conductors bonded to the main
earthing terminal by protective conductors?
b) Is the platform bonded to earth by a separate conductor?
c) Does the resistance of the earth protective path exceed .1 ohm?
d) Insulation resistance to earth. Power circ. safety circuits.
e) Full load control volts.
f ) Are the platform anti-trapping safety devices adequate?
By for example, an enclosure, guards, bellows, blinds, safety edges
or sensitive surfaces.
g) Do they operate correctly?
h) Does the platform level to or - 12mm on full load?
i ) Is adequate liftway protection provided?
By for example, short fl ights of steps, strong enclosure 1M
above upper level, inter locked gate or barrier.
j ) Are the liftway clearances adequate? (As stated in Specifi er’s Guide)
That is less than 10mm or greater than 150mm or protected by
sensitive edges.
k) Do the interlocks on any gates fi tted operate correctly? Carriage
Upper level (optional)
l ) Does the manually operated scotching device operate correctly?
m) Does the manually lowering valve function correctly?
n) Does the fi nal limit switch latch operate correctly ?
o) Does the upper limit switch stop the lift at the upper level?
p) Confi rm that the on-site load test has been successful
List any points on which the installation fails to comply:-
NOTES