TERRY Melody 1, Руководство по установке

Страница: 11 / 66

Terry Melody 1 - Installation Instructions - ED01050g
11
ref: ED01055c, dated: 28/01/2010
MELODY 1 SCHEMATIC CABLE RUN
MELODY 1 DUCT POSITIONS
1 x 40mm duct from either side of the lift, in the base or the lift face at ground
level. This duct goes to the charger box.
1 x 40mm duct from lower call station to the front corner of the platform /
ramp
1 x 40mm duct from upper call station to the power pack.
1 x 40mm duct from the centre of the lift face, 100mm up from the base going
back to the charger box or join this one in with the lift cable duct.
If the call stations are to be fl ush mounted then a 50mm deep double socket
back box needs fi tting vertically at each landing.
Note: All ducts to have swept elbows and a substantial draw cord fi tted
NOTES
This component must
be located internally
240 V AC
Charger
Box
Single or double mains socket
or 13 Amp –switched spur
with front outlet.
Lower Call
Station post mounted
(7 Core X 0.75 used)
8 Core Cable
8 core cable
External Wall
Upper Level Gate with Upper
Call Station incorporated.
Melody 1