manualshive.com logo in svg

TERRY Melody 1, Руководство по установке, Страница: 21 / 66

Поделиться
Скачать
TERRY Melody 1 Скачать руководство пользователя страница 21

Terry Melody 1 - Installation Instructions - ED01050g

21

ref: ED01073b, dated: 07/05/2008

DECLARATION  of  CONFORMITY

Lift Type: Melody 1

This lift was manufactured by TERRY GROUP Ltd., who declare that this lift 
fulfils all the relevant provisions of the following Directives:

2004/108/EEC

EMC Specifications

2006/95/EEC

Low Voltage Directive

2006/42/EC

Machinery Directive

This lift also fulfils all the relevant provisions of the following Standards:

BSEN 55014-1:2006

Electromagnetic Compatibility (EMC)

BSEN 55011:2007

Electromagnetic Compatibility (EMC)

BSEN 61000 series

Electromagnetic Compatibility (EMC)

BS6440:2011

Powered lifting platforms for use by disabled persons

Person authorised to compile Technical File:
Greg Gnyp, Terry Group Ltd., Longridge Trading Estate, Knutsford, Cheshire, 
WA16 8PR

This declaration was completed at Terry Group Ltd., Longridge Trading 
Estate, Knutsford, Cheshire, WA16 8PR, on 29 December 2009.

This compliance is only valid if the installation test Certificate has been 
completed and signed by a competent lift engineer which confirms that it has 
been installed to the latest installation instructions.

TERRY GROUP Ltd.

P.Morrey (Managing Director)

NOTES

Содержание Melody 1



































































Отзывы:

Нет отзывов