Operator's Manual
Second Edition • First Printing
Controls
24 Z
®
-62/40 • Z
®
-62/40 TRAX
™
Part No. 1304187GT
Ground Control Panel
1
Function enable button
Press and hold the function enable button to
enable the functions on the ground control
panel to operate.
2
Secondary boom up/down switch
Move the secondary boom up/down switch up
and the secondary boom will raise. Move
secondary boom up/down switch down and the
secondary boom will lower.
3
Primary boom up/down switch
Move the primary boom up/down switch up and
the boom will raise. Move the primary boom
up/down switch down and the boom will lower.
4
Primary boom extend/retract switch
Move the primary boom extend/retract switch
to the right and the primary boom will extend.
Move the boom extend/retract switch to the left
and the primary boom will retract.
5
LCD readout screen
Screen displays hour meter, voltage, oil
pressure and coolant temperature. Screen also
displays fault codes and other service
information.
or
Hour meter
The hour meter displays the number of hours
the machine has operated.
6
Gasoline/LPG models: Check engine light
Diesel models: Oil pressure light
Light on and engine stopped: Tag the machine
and remove from service.
Light on and engine still running: Contact
service personnel within 24 hours.
7
Platform overload indicator light
Light flashing indicates the platform is
overloaded. The engine will stop and no
functions will operate. Remove weight until the
light goes off and then restart the engine.
8
Key switch for ground selection/off/platform
Turn the key switch to the ground position and
the ground controls will operate. Turn the key
switch to the off position and the machine will
be off. Turn the key switch to the platform
position and the platform controls will operate.
