TENNANT A60
English 1064354 rev. 00
- 46 -
4.4.
While driving
While driving, the driver must check the following functions of the vehicle and engine
regularly to prevent damage:
Information display (see section 3.7)
» Check the
symbol on the main screen of the information display for the current fuel
tank
-
There should always be a sufficient amount of diesel in the tank
-
At a tank level of ± 18 liters, an automatic warning is given. (see section 3.7)
-
At a tank level of ± 4 liters, an alarm is given (see section 3.7)
» Check the
symbol on the main screen of the information display for the current
engine temperature
-
At an engine temperature of 103 °C, an automatic warning is given (see section 3.7).
Avoid any further increase in temperature to prevent damage to the engine.
-
At an engine temperature of 107 °C, an alarm is given (see section 3.7).
Immediately park the vehicle in a safe place and switch off the diesel engine.
» Check the
symbol on the main screen of the information display for the current
hydraulic fluid temperature.
-
At an engine temperature of 95 , an automatic warning is given (see section 3.7).
Avoid any further increase in temperature to prevent damage to the engine.
-
At a hydraulic fluid temperature of 103 , an alarm is given (see section 3.7).
Immediately park the vehicle in a safe place and switch off the diesel engine.
Make sure that when large distances have to be covered the water tank is filled
to at least 30% (± 120 L) to ensure sufficient cooling of the hydraulic fluid.
» Check the
symbol on the main screen of the information display for the battery
charge level.
4.5.
Switching off the vehicle
The hand brake must always be engaged when the vehicle is switched off.
Otherwise the vehicle could start moving of its own accord.
1)
Bring the vehicle to a halt:
-
First release the accelerator pedal: the vehicle will brake on the engine.
-
Then push down the brake pedal: the vehicle comes to a complete standstill.
2)
Switch on the hand brake (fig. 7, no. 7).
3)
Deactivate all engaged functions.
4)
Put the forward / reverse selector in neutral (N).
5)
Turn the ignition key fully counter-clockwise and remove it from the lock.
