manualshive.com logo in svg

Tennant A60, Руководство оператора

Поделиться
Скачать
Tennant A60 Скачать руководство пользователя страница 18

 

TENNANT A60

 

 

 

 

 

English                                                                                                                                      1064354 rev. 00 

 

- 18 -

2.7.

 

Safety provisions 

The vehicle is fitted with a number of automatic and manual safety provisions to guarantee 
the safety of people and the vehicle. 

2.7.1.

 

Automatic provisions 

these safety provisions are activated automatically and must not be neutralized 

in any way

. 

 

»  Automatic brake-light system 
Turned on as soon as the vehicle decelerates. 
 
»  Automatic hand brake system 
Is automatically activated when the diesel engine is turned off. 
 
»  Sensor mat in driver’s seat 
Disconnects the brushes and the driving function when the driver is not sitting on the seat. 
 
» Reverse alarm 
Acoustic signal that can be heard when the vehicle reverses. 
 
» Audible alarm 
Acoustic signal that can be heard when the dirt hopper is tipped, lowered or when the rear 
door opens or closes. 
 
» Warning light 
Starts flashing when the dirt hopper starts tipping and continues to flash until the safety 
support is in place beneath the dirt hopper. 
When the safety support is removed, the warning light starts flashing again until the dirt 
hopper is lowered completely. 
 
»  Hydraulic pressure switch in the tipping cylinders 
Ensures that above a certain weight the dirt hopper cannot be tipped unless the rear door is 
open. 
 
»  Four independent hydraulic pumps 
 
»  Over-pressure safeguard on all hydraulic systems 
 
» Hose-rupture safeguards 
The hydraulic tipping cylinders are fitted with hose burst valves. 
 
»  Hydraulic system that ensures that the sweeping unit is blocked when raised 
The blocking is only removed when the sweeping unit is operated to be lowered. So the 
sweeping unit cannot be lowered while the vehicle is driving. 
 

Содержание A60






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды