Installation
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
36 of 158
Verification of Manual Controls
This section provides instructions on how to test the manual
controls to ensure the tester can perform basic functions.
1.
Turn on (I) the Vision heater with the power switch
located on the back.
2.
Turn on (I) the tester using the power switch on right
side of the drive head.
3.
Once the tester has reached the home screen,
touch the current motor speed (0.0) and the motor
speed screen should appear.
4.
Touch the 50 button to set the motor speed to 50
rpm. Observe the spindles and ensure that they
spin.
5.
Touch the current temperature and the temperature
set point screen should appear.
6.
Touch the 37 button to set the bath temperature to
37 °C.
7.
Observe the temperature on the home screen and
ensure that the temperature begins to rise.
Vision Tester Communication Connections
This section provides instructions on how to make the
communication connections between the Vision tester and a
serial (validation) printer, an autosampler or a network
(including a PostScript capable network printer, if applicable).
NOTE: For more information on TCP/IP communications, refer
to appendix B. For connecting to a Waters Alliance Dissolution
System, refer to appendix C.
1.
Use an RS-232 cable to connect a serial (validation)
printer to the Serial Printer port on the tester.
2.
Use a network cable to connect the LAN port of the
tester to an autosampler, a network switch, or a port
of the local network, as appropriate.
Содержание VISION G2 CLASSIC 6
