Teledyne VISION G2 CLASSIC 6, Руководство пользователя, Страница: 117 / 159

Dissolution Testing
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019 116 of 158
Once the media has stabilized, ensure the protocol is loaded
by checking the upper left corner of the screen. If the correct
protocol is loaded, do nothing. If it is not, touch the upper left
corner of the screen, then touch Exit and select the protocol to
be used for testing.
Touch the Start button in the lower right corner of the screen.
Enter the header information as appropriate, then touch
Next (
).
Prepare the apparatus as instructed below. Once the test is
running, the AutoMag will lower and begin monitoring the
vessel temperatures if configured to do so.
a. Baskets - Elite 8
i. Place the dosage in each basket and
install the baskets on the basket
shafts.
ii. Remove the vessel cover over each
of the positions.
iii. Lower the drive head to the testing
position.
iv. Touch Run to start the test.
v. Replace the vessel covers over each
of the positions.
b. Paddles
i. Remove the vessel cover over each
of the positions.
ii. Rapidly drop a dosage in each
position.
iii. Touch Run to start the test.
iv. Replace the vessel covers over each
position.