Teledyne ACCQPrep HP125 Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 142

background image

ACCQPrep HP125
Section 5 PeakTrak

5-20

• Current Data Path — The top-left corner of the window

displays the path (current folder). As you browse
through the files, the path will update as you go.

• N

EW

— Click this button to add and name a subfolder

within the currently selected folder.

• D

ELETE

— Click this button to delete the selected folder.

• Folder selection box — This box lists the available

folders and selection buttons.

• OK — Click this button to save your selection as the

data path and close the window.

• C

ANCEL

— Click the C

ANCEL

button to close the window

without changing the data path

5.2.11 MS Method

Development

The MS->M

ETHOD

D

EVELOPMENT

menu command opens the

PurIon mass spectrometer method development window (PurIon
equipped systems only). This enables a user to test and verify
ionization conditions for their compound. This command is not
available from a remote connection. This window contains the
following controls:

• Polarity—On the PurIon system, this control changes

the probe polarity between positive and negative
ionization. On PurIon S and PurIon L systems, this
button toggles the displayed mass spectrum between
positive and negative ionization.

• Ion Settings– Allows selection of different ion settings to

maximize the intensity of the desired molecular ion. The
factory selections include “Robust”, for compounds that
do not easily ionize. “Typical” works well for most
compounds. The “Fragile” setting is used for those
compounds that are delicate or easily fragment. User
defined ion settings may also be loaded.

• Ion Finder- Identifies potential adducts and fragments

for the compound of interest when the compound of
interest does not show up in the spectrum graph. This
algorithm identifies the mass of the 10 most intense ions
and compares that to the desired compound’s molecular
weight. The difference in mass is compared to a table of
potential adducts or fragments. This list is displayed to
the user to determine if any of these potential adducts or
fragments corresponds to the mass of interest and could
be used as the detection ion.

• Detection Ions—After a spectrum is collected, clicking

on a peak adds that ion to this control. Alternately,
masses can be entered using a keypad control.

• Clear Ions—clears the last value entered into the

Detection Ions control.

• Mass spectrum graph- this displays the mass spectrum.

There are two mass spectra displayed. The spectrum
depicted in blue shows what the PurIon is currently
detecting. The red spectrum depicts the largest peaks

«
...
82
83
84
85
86
...
»

Содержание ACCQPrep HP125















































































































































Отзывы:

Нет отзывов

Похожие инструкции для ACCQPrep HP125

Бренд: Pall Страницы: 51

Бренд: ZAMST Страницы: 21

Бренд: XTA Страницы: 29

Бренд: vc999 Страницы: 59

Бренд: Qtx Страницы: 3

Бренд: Raytheon Страницы: 69

Бренд: Galaxy Audio Страницы: 24

Бренд: AcceleDent Страницы: 3

Бренд: Zero 88 Страницы: 32

Бренд: NatureZap Страницы: 2

ProFire Lightbridge

Бренд: M-Audio Страницы: 8

Бренд: M-Audio Страницы: 36

Бренд: Mackie Страницы: 18

Бренд: Mackie Страницы: 2

Бренд: Mackie Страницы: 8

Бренд: Mackie Страницы: 7

Бренд: Vahterus Страницы: 31

Бренд: Zodiac Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды