How to Operate Your Instrument
Diamond Display
Pressing the MAIN button calls up the Main pop-up menu. From the Main pop-up menu, you can select the Diamond display
under the Gamut heading. The Diamond display shows Gamut violations of the SDI input if translated to RGB color space.
Display Elements:
1. High threshold:
Shows the level above
which RGB components are considered
too large and out of gamut. Signals
above this level will trigger an error/alarm
if the number of pixels in error exceeds
the Area setting.
2. Low threshold:
Shows the level below
which RGB components are considered
too small and out of gamut. Signals
below this level will trigger an error/alarm
if the number of pixels in error exceeds
the Area setting.
3. Area
- Specifies the percentage of the
total image pixels (up to 10%) that can
be outside the current gamut limits, yet
not be reported as a gamut error.
4. Threshold indicators:
indicates the
threshold settings using blue dashed
lines.
NOTE.
To change the threshold settings,
touch the threshold readouts and then adjust
their values using the large knob.
If the signal appears outside the boundary shown by the blue dashed lines, then the signal is violating the limits that are set.
If alarms have been enabled, then gamut violations will be reported when the signals falls outside the boundaries shown by
the blue lines if the number of pixels in error exceeds the Area threshold.
Diamond Menu
The Diamond menu enables you to reset the threshold limits to two default settings.
Default Limits: Tek RGB.
Resets limits to factory defaults.
Default Limits: EBU-103 RGB.
Resets the limit thresholds to the values recommended in the EBU R103--2000
specification.
70
Quick Start User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
