Tektronix TMSST1, Инструкция по эксплуатации

Страница: 20 / 60

Getting Started
1--4
TMSST1 775-Pin Socket Hardware Support
The cache bus is not monitored; therefore, the cache must be disabled. Disabling
the cache makes all instruction prefetches visible on the bus so that they are
acquired and displayed and correctly disassembled.
Connecting the Logic Analyzer to a Target System
WARNING.
To prevent static damage to the Microprocessor, the probe adapter, the
probes, and the module, you must handle components only in a static-free
environment. Always wear a grounding wrist strap, heel strap, or similar device
while handling the Microprocessor and probe adapter.
To prevent harm to yourself or damage to the preprocessor unit, do not open the
preprocessor unit. There are no operator serviceable parts inside the preproces-
sor unit. Refer servicing of internal parts in the preprocessor unit to Tektronix
authorized personnel only. External parts may be replaced by qualified service
personnel.
You must allow airflow clearance for the preprocessor unit. Refer to the
dimensions on page 2--6 for the required clearance.
Following is a list of tools:
H
Use a flatbladed screwdriver (0.1 inch tip width) to tighten the probe head to
the target system.
H
Optional Tool.
A torque wrench helps to ensure reliable connections by
meeting the nominal torque values listed in these instructions. When
attaching screws to the probe head use 4 in-lbs (0.451 N
G
m) of torque,
unless stated otherwise.
NOTE
. For storage and shipping, retain the cardboard cartons and packing
material that is shipped with the probe adapter.
Disabling the Cache
Tools