Tektronix TMSST1, Инструкция по эксплуатации

Страница: 40 / 60

Specifications
2--4
TMSST1 775-Pin Socket Hardware Support
C4
0.5 pF
R1
10 m
Ω
C3
0.7 pF C2
0.5 pF
L1
3.2 nH
Signal In 1 Signal Out 2
Figure 2--2: Mated Samtec load model
75
Ω 225 fF
VREF~0.8 V
0.2
Ω
TD=83 ps
Z0=75
Ω
TD=5 ps
Z0=100
Ω
450 fF
Figure 2--3: Receiver load model
Specification Tables
These specifications are for a probe adapter connected between a compatible
Tektronix logic analyzer and a target system. The signal voltage swing in your
target system must be at least 600 mV
p-p
around the GTL+ reference voltage.
Table 2--1 lists the electrical requirements of the target system. Table 2--2 lists the
electrical requirements for the power supply that provides power to the probe
adapter. Table 2--3 lists the environmental specifications.
Table 2--1: Electrical specifications for the target system
Characteristics Requirements (Typical)
DC power requirements
Typical -- V
cc
= 1.2 V, V
REF
= 0.8 V, at 25
°
C
Voltage, V
cc
1.2 V
ᐔ
5%
Common clock rate Maximum 266 MHz
Common clock capture
Typical -- V
cc
= 1.2 V, V
REF
= 0.8 V, V
IH
= V
REF,
+400 mV, V
IL
= V
REF
--400 mV, at 25
°
C
Window 750 ps
T
su
1 ns
T
hd
--250 ps