Tektronix MDO3012, Руководство пользователя

Страница: 231 / 243

Appendix C: P6316 General-Purpose Logic Probe Information
Speci fi cations
Table 8: Electrical and mechanical speci fi cations
Characteristic Description
Input channels 16 digital input
Input resistance, typical 101K Ohm to ground
Input capacitance 8 pF
Input signal swing
Minimum, typical 500 mV p-p
Speci
fi ed at the input to the P6316 probe with all 8 ground inputs connected
to the user’s ground. Use of leadsets, grabber clips, ground extenders, or
other connection accessories may compromise this speci
fi cation.
Maximum, typical +30 V, –20 V
Table 9: Environmental speci fi cations
Characteristic Description
Temperature
Maximum operating +50 °C (+122 °F)
Minimum operating 0 °C (+32 °F)
Non-operating –40 °C to +71 °C (–40 °F to +159 °F)
Humidity 5% to 95% relative humidity at up to +30 °C (+86 °F)
5% to 60% RH above +30° C (+86 °F) up to +50 °C (+122 °F), non-condensing
Altitude
Operating 3,000 meters (9,843 feet)
Non-operating 12,000 meters (39,370 feet)
Equipment Recycling. This product complies with the European Union’s requirements according to Directive
2002/96/EC on waste electrical and electronic equipment (WEEE). For more information about recycling
options, check the Support/Service section of the Tektronix Web site (www.tektronix.com).
Safety Summary
To avoid potential hazards, use this probe only as speci fi ed.
Connect and Disconnect Properly.
Connect the probe output to the measurement instrument before connecting
the probe to the circuit under test. Disconnect the probe input and the probe ground from the circuit under test before
disconnecting the probe from the measurement instrument.
Observe All Terminal Ratings.
To avoid fi re or shock hazard, observe all ratings and markings on the product. Consult
the product manual for further ratings information before making connections to the product.
MDO3000 Series Oscilloscopes User Manual 209