Tektronix MDO3012, Руководство пользователя

Страница: 56 / 243

Installation
10. After you have set up the socket server
parameters, the computer is now ready to
communicate with the oscilloscope. If you
are running an MS Windows PC, you could
run its default client Telnet, which has a
command interface. One way to do this is
by typing “
Telnet
” in the Run window.
The Telnet window will open on the PC.
NOTE. On MS Windows 7, you must fi rst
enable Telnet in order for Telnet to work.
11. Start a terminal session between your
computer and your oscilloscope by typing in
an open command with the oscilloscope's
LAN address and port #.
You can obtain the LAN address by pushing
the
Ethernet & LXI lower menu button
and the resulting LAN Settings side menu
button to view the resulting Ethernet and
LXI Settings screen. You can obtain the port
# by pushing
Socket Server on the lower
menu and viewing Current Port on the side
menu.
For example, if the oscilloscope IP address
was
123.45.67.89
and the post #
was the default of 4000, you could open
a session by writing into the MS Windows
Telnet screen:
o 123.45.67.89 4000
.
The oscilloscope will send a help screen to the
computer when it has
fi nished connecting.
34 MDO3000 Series Oscilloscopes User Manual