Tektronix MDO3012, Руководство пользователя

Страница: 98 / 243

Acquire the Signal
Standard
CAN 2.0
CAN FD
Bit Rate
500 kbps
FD Bit
Rate
4 Mbps
6. Push Standard to select between CAN 2.0
and CAN FD decode/trigger standards.
While CAN FD is backwards compatible
with CAN 2.0 packets, CAN 2.0 should be
selected for best performance with non CAN
FD bus con
fi gurations.
FD
Standard
ISO
non-ISO
7. Push Bit Rate , and turn Multipurpose a to select from the list of prede fi ned bit rates.
Alternatively, you can set the bit rate to a speci fi c value. To do so, select Custom, and then turn Multipurpose b to set the
bit rate from 10 kbps to 1 Mbps.
When Standard is set to CAN FD, this will be the SD bit rate.
8. If Standard is set to CAN FD, push FD Bit Rate , and turn Multipurpose a to select from the list of prede fi ned bit rates.
Alternatively, you can set the bit rate to a speci fi c value. To do so, select Custom, and then turn Multipurpose b to set
the bit rate from 500 kbps to 7 Mbps for the MDO3000.
9. If Standard is set to CAN FD, push FD Standard to select between ISO (11898-1:2015) and non-ISO (Bosch:2012)
protocol standards.
76 MDO3000 Series Oscilloscopes User Manual