Tektronix 070-9778-03, Руководство по обслуживанию

Страница: 66 / 119

Maintenance
6–14
TLA 711 Color Benchtop Controller Service Manual
Remove screws (6)
Chassis
Figure 6–5: Subassembly to chassis housing view
CAUTION.
The subassembly is attached to the chassis by the four SMB connector
cable assemblies. Use care when lifting the subassembly out.
7. Carefully lift the subassembly part way out of the chassis.
8. Carefully turn the subassembly over and disconnect the four SMB connectors
on the controller board. See Figure 6–7, and Table 6–4 for the color code
placement of the four SMB cable assemblies.
9. Pass the connector assembly wires through the space between the controller
board and the adapter board to remove the subassembly from the chassis.
To install the subassembly into the enclosure refer to Figures 6–4 and 6–5 and
follow these steps:
1. Pass the connector assembly wires through the space between the controller
board and the adapter board.
Installation