Tektronix 070-9778-03, Руководство по обслуживанию

Страница: 92 / 119

Troubleshooting
6–40
TLA 711 Color Benchtop Controller Service Manual
11. Click
Next>
to continue.
a. When the popup prompts you:
Do you want Windows to search for your new
hardware
, click
Yes [Recommended]
.
b. Click
Next>
to proceed, and click
Next>
again to confirm that you want to
continue.
c. The Add New Hardware Wizard will take a few minutes to complete the
task.
12. When the Add New Hardware Wizard completes its task, click the
Details
button and verify that
Advanced power management support
is listed.
13. Click
Finish
, and exit the Add New Hardware Wizard.
14. In the Control Panel, double click on the
Power
icon.
15. Verify that there is a Power tab present in Power Properties.
16. Verify that
Allow Windows to manage power use on this computer
is checked. If
it is not checked, click on the little box to place a check mark there.
17. Click
Advanced...
Verify that the
Show suspend command on Start menu
is not checked. If it is
checked, click on it to remove the check mark.
18. Close the Power Properties text box, and close the Control Panel.
19. Close out your Windows session by selecting
Shut Down...
from the Windows
menu.
20. The instrument will close your Windows session and automatically power
off.
Run the QAPlus/WIN diagnostic software to verify that all of the functions of the
benchtop controller are functioning correctly.
After running the QA/Plus/WIN diagnostics, quit the application by selecting
Restart MS Windows
, and clicking the
OK
button. This guarantees that the
TLA 700 returns to a stable state for normal operation.
Verify Operation