Tektronix 070-9778-03, Руководство по обслуживанию

Страница: 76 / 119

Troubleshooting
6–24
TLA 711 Color Benchtop Controller Service Manual
NOTE . The controller board and the adapter board are not replaceable parts on
their own. If there is a failure of either the controller board or the adapter board,
return the entire benchtop controller to a Tektronix Service Center for module
exchange.
Required Documents
Other TLA 700 manuals may be required to help you isolate faults; other
manuals and other sections in this manual contain instructions you will need to
complete repairs after locating a faulty part. Refer to Table 6–5 for a list of
required documentation.
Table 6–5: Required documentation
Manual or Section Purpose
TLA 711 Color Benchtop Chassis Service
Manual To eliminate benchtop chassis as problem
source
TLA 700 Series Logic Analyzer Performance
Verification and Adjustment Procedures
Technical Reference To perform periodic verification and calibration,
or to check and adjust after module or
replaceable part replacement
TLA 700 Series Logic Analyzer Installation
Manual To remove and reinstall modules in the
benchtop chassis
To reinstall Windows95 or TLA 700 Software
when required
Removal and Replacement Instructions (in this
manual) To remove and reinstall failed replaceable parts
Replaceable Parts List (in this manual) To order replaceable parts
Update the BIOS (in this manual) To update the BIOS
For a list of all manuals available for the TLA 700 Logic Analyzer, see Related
Manuals on page vii of the Preface to this manual.
Check for Common Problems
Use Table 6–6 to quickly isolate possible failures. Table 6–6 lists problems
related to the benchtop controller and possible causes. This list is not exhaustive,
but it may help you eliminate a problem that are quick to fix, such as a blown
fuse or loose cable.