Tektronix 070-9778-03, Руководство по обслуживанию

Страница: 110 / 119

Replaceable Mechanical Parts
10–4
TLA 711 Color Benchtop Controller Service Manual
Using the Replaceable Parts List
The rest of this chapter contain lists of the replaceable mechanical and/or
electrical components of the Portable Mainframe. Use these lists to identify and
order replacement parts. The following table describes each column in the lists.
Table 10–3: Parts lists column descriptions
Column
number
Column name Description
1 Figure and
Index Number Figure and index numbers in the exploded view illustrations.
2 Tektronix
Part Number Use this part number when ordering replacement parts from
Tektronix.
3 and 4 Serial Number Column 3 indicates the serial number at which the part was
first effective. Column 4 indicates the serial number at which
the part was discontinued. No entries in either column
indicates the part is good for all serial numbers.
5 Qty Quantity of parts used.
6 Name and
Description An item name is separated from the description by a
colon (:). Because of space limitations, an item name may
sometimes appear incomplete. Use the U. S. Federal
Catalog Handbook H6-1 for further item name identification.
7 Mfr. Code Manufacturer code.
8 Mfr. Part Number Manufacturer’s or vendor’s part number.
Abbreviations conform to American National Standard ANSI Y1.1–1972.
The table titled Manufacturers Cross Index shows codes, names, and addresses of
manufacturers or vendors of components listed in the parts list.
Abbreviations
Mfr. Code to Manufacturer
Cross Index