Lokommander II Next18 ECU
User Manual firmware 5.10.306
Version 0.5.07
Page 33 of 118
Bit4 (CV122) = 1. CV142 will set the waiting time, in steps of 1 second. On the way may coexist ABC
"Slow Approach" sectors, where the locomotive will slow down.
12.3.2.
With intermediate stops
The Shuttle train operation with intermediate stops requires two separate sections at the ends of the route
that generate an ABC "Slow approach" signal corresponding to the direction the locomotive approaches. In
the intermediate sectors where the stop is desired, the ABC "Stop" signal will be activated corresponding to
the direction from which the locomotive approaches. The intermediate stop will last until the ABC "Stop"
signal will disappear. Activation is made by Bit5 (CV122) = 1. CV142 will set the waiting time (in terminal
stations), in steps of 1 second.
For Shuttle train operation, ABC signal detection must be activated in CV27 for one direction.
ABC activation is not allowed for both directions, this will lead to erroneous operation of " Shuttle
train operation! Simultaneous activation of Bit4 and Bit5 (CV122) is not allowed!
It is recommended to activate one of the constant braking distance methods to ensure that the locomotive
stops every time in the same place, regardless of travel speed.
