Teeter FreeStep LT1 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 24

Teeter FreeStep LT1 Скачать руководство пользователя страница 17

Set Seat Back Position

The Seat Back can recline to offer support for
the lower back while targeting different muscle
groups during your workout. To properly set the
Seat Back position, start with the seat in the fully
upright position.

Figure 35:

To adjust the Seat Back position, first

push in on the Seat Back Adjustment Knob.

Figure 38:

The Lower Seat can be adjusted to a Forward

or Back Position. The Forward Position will provide the
largest surface area of support while seated.

The Lower Seat is bolted to the to the Seat Back
Assembly with 4 × Bolts and is attached during the
assembly process.

To adjust the Lower Seat, set the Seat Post Height to
the tallest position for better access to the Bolts under
the Lower Seat, and remove the 4 × Bolts with the Allen
Wrench provided. Set the Bolts and Washers aside.

Fully

Upright

Forward

Position

Fully

Reclined

Back

Position

15

Figure 35

Figure 36

Figure 37

Figure 36-37:

Slowly pull back on the Seat Back

and let go of the Seat Back Adjustment Knob
until the Knob snaps into a hole setting.

You may need to adjust the Seat Height to
accommodate a reclined position.

Figure 38

MODEL LT3 ONLY

Modify Lower Seat Position

(requires Allen Wrench to adjust)

Adjust the Seat to the desired position and reassemble the Bolts and Washers. Refer to Figure 9 and 10 on
Page 8 of the Assembly Instructions for more details on Bolt and Washer reassembly.

USER GUIDE

«
...
15
16
17
18
19
...
»

Содержание FreeStep LT1

























Отзывы:

Нет отзывов