Teeter FreeStep LT1, Инструкции по сборке и использованию, Страница: 14 / 24

CORRECT
The Right and Left Handles are
assembled correctly (Figure 23).
INCORRECT
The Right and Left Handles are switched
and need to be corrected (Figure 24).
Handle Installation
Figure 22:
Loosen the Handle Adjustment Knobs on
the right and left Handle Support Tubes by turning
the knobs counter-clockwise, then pulling outward.
Locate the Handles, noting Right and Left markings.
With the top of the handles pointing outward, insert
both Handles into the corresponding Handle Support
Tube. Adjust Handles as desired and tighten Handle
Adjustment Knobs by releasing into a hole setting
and then rotating clockwise.
STEP 6
ASSEMBLE HANDLES
12
Figure 22
Figure 23 Figure 24