Teeter FreeStep LT1 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 24

Teeter FreeStep LT1 Скачать руководство пользователя страница 13

11

Pedal Arm Joint Cover Sets Installation

Figure 20:

Locate the Pedal Arm Joint Cover Sets,

noting Right and Left markings. Pair each set over the
corresponding Right and Left Pedal Arm Joints.

60

Phillips Head

Screw

60

Phillips Head

Screw

Upper Front Leg Cover Sets Installation

IMPORTANT:

Make sure the Speed Sensor Wire sits

under the Left Upper Front Leg Cover Set and is not
pinched during installation.

TIP:

In order to gain better access to the screw holes

while assembling the Upper Front Leg Cover Sets, adjust
the position of the Pedal Arm Joints by pushing forward
or pulling backward on the Handle Support Tubes.

STEP 5

ASSEMBLE COVER SETS

Figure 20-21:

Use the

Step 5 Hardware Kit

to install the

Pedal Arm Joint Cover Sets

. Partially tighten 2 × Phillips

Head Screws on each set as shown. Ensure they are properly
aligned and proceed to fully tighten the Phillips Head Screws
with the Screwdriver.

Figure 18-19:

Use the

Step 5 Hardware Kit

to install the

Upper Front Leg Cover Sets. Partially tighten 3 × Phillips
Head Screws using the Screwdriver provided on each set
as shown. Ensure they are properly aligned and proceed to
fully tighten the Phillips Head Screws with the Screwdriver.

Figure 18:

Locate the Upper Front Leg Cover Sets,

noting Right and Left markings. Pair each set over the
corresponding Right and Left Upper Front Leg.

Figure 21

Step 5 Hardware

Figure 20

Figure 19

Step 5 Hardware

Figure 18

«
...
11
12
13
14
15
...
»

Содержание FreeStep LT1

























Отзывы:

Нет отзывов