Teeter FreeStep LT1 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 24

Teeter FreeStep LT1 Скачать руководство пользователя страница 11

Console Front Support Bar Installation

IMPORTANT:

Do not pull or pinch the Speed

Sensor Wire during the Console Front Support
Bar Installation.

Figure 13:

Open the Battery Compartment

located on the back of the console. Ensure that
the battery contacts and compartment are
clean. Locate the (2) included batteries (AA 1.5
V Alkaline) and install them in the back of the
Console in the Battery Compartment, noting (+)
and (-) symbols.

108

Bolt

109

Curved Washer

9

STEP 4

ASSEMBLE SUPPORTS

Step 4a Hardware

Figure 15

Figure 14

Figure 13

Figure 15:

Use the

Step 4a Hardware Kit

to attach the Console Front Support Bar.
Hand tighten 4 × Bolts with 4 × Curved
Washers as shown. The Curved Washers
should wrap around the shape of the Lower
Console Support Tube. Proceed to fully
tighten the Bolts with the Allen Wrench.

Figure 14:

Carefully connect the Speed

Sensor Wires.

Ensure that the Speed Sensor Wires remain on the outside. Align both ends of the Console Front Support Bar
with the Lower Console Support Tube and insert.

«
...
9
10
11
12
13
...
»

Содержание FreeStep LT1

























Отзывы:

Нет отзывов