- 38 -
AUTOMATIC RESET DOUBLE THERMOSTAT (TR - FAN)
The appliances are equipped with a mechanical safety thermostat which performs the function described
below:
•
“SAFETY” FUNCTION (TR Safety thermostat
- pre-set calibration: 80°C )
: it stops the burner
if the air is anomalously overheated.
It is automatically restored
. This function is performed by a thermostat, whose sensor is placed
on the warm air outlet. It is automatically restored, after removing the causes that have triggered it.
It shall be correctly calibrated when it is used for the first time.
ELECTRIC CONNECTION AND CALIBRATION PROCEDURE
When the warm air heater is supplied, its electric connections are already in place and the double thermostat
is already calibrated. Should the temperature be set again (for maintenance, inspection or replacement of the
component) refer to the image above.
ATTENTION!!!
•
Ensure that the cable remains locked in the clamp by pulling it slightly
.
•
The metal bridge must be removed.
TR
Limit switch
Thermostat
index
TR
Reference
notch
