- 23 -
BLOCKS FOR TRANSPORTATION
To prevent damage during transport, some mechanical blocks may be installed (red in colour) that constrain
the movement of certain internal components. The identification and instructions for removal of these blocks
are reported on a self-adhesive label positioned on the unit.
ATTENTION!!!
It is mandatory to remove any blocks before performing first start-up
SAFETY AREA
The unit must be easily and safely accessible without the need for special equipment (ladders,
mobile platforms, etc.)
. Around the unit it is also necessary to respect the minimum distances to allow
normal control and/or maintenance operations and not to create obstacles to the flow of air.
WARNING!!!
Any restrictions deriving from specific Laws and regulations must also be observed (for example regarding
fires). Refer to the designer of the system.
FUEL CONNECTION
The machine should be connected to the fuel network by qualified and skilled personnel and the manual
instructions and the relevant regulations should be carefully complied with.
As far as gas burners are concerned, we suggest placing a leak detector near them, which will operate an
electro valve that will stop the gas supply in case of any accidental leak.
The gas supply line should be created by a skilled and qualified person, in compliance with all the relevant
Laws, Regulations and Rules. Refer to the designer of the system.
