WARNING
CAREFULLY READ AND FOLLOW THE INSTRUCTIONS FOR USE BEFORE
OPERATING THE INSTRUMENT.
Notice
Every effort has been made to avoid errors in text and diagrams, however,
Tecan Austria Ges.m.b.H. assumes no responsibility for any errors which may
appear in this publication.
It is the policy of Tecan Austria Ges.m.b.H. to improve products as new
techniques and components become available. Tecan Austria Ges.m.b.H.
therefore reserves the right to change specifications at any time.
We would appreciate any comments on this publication.
Tecan Austria Ges.m.b.H.
Untersbergstraße 1A
A-5082 Grödig/Salzburg
AUSTRIA / EUROPE
Telephone: 06246/8933
FAX: 06246/72770
E-mail: [email protected]
Copyright Information
The contents of this Instructions for Use (IFU) are the property of Tecan Austria
Ges.m.b.H and are not to be copied, reproduced or transferred to another person
or persons without our prior written permission.
Copyright
Tecan Austria Ges.m.b.H
All rights reserved.
Printed in Austria.
Declaration for EU Certificate
See the back of this Instructions for Use (IFU).
Intended use of Instrument
The Columbus Washer is an in vitro diagnostic instrument for stripwise
processing of microplates in the 96 well format (384 well format as option). The
instrument is designed for professional use only.
About this
Instructions for Use (IFU)
This Instructions for Use (IFU) describes the basic Columbus Washer, designed
to wash microplates. It contains instruction for the use of the instrument and is
intended as a reference for the user.
It instructs the user how to:
•
Install the instrument
•
Operate the instrument
•
Programming the wash procedure
•
Definition on the wash parameters
•
Cleaning and maintenance procedures
May 2003
Instructions for Use for Columbus Washer No. I 109 006 Rev No. 2.2
3
