5. Programming Procedure
5.4 Show
Program
This submenu is used to display the parameters that have been defined for a
program.
The displayed parameter settings can not be altered in this submenu.
Selected plate type displayed
Selected manifold type displayed
Selected dispensing speed (1 - 5 or drip)
Printing......
Parameters being printed
Plate Type: X
exit yes
Manifold Type:XX
exit yes
Disp Rate: X
exit yes
Asp Rate: X
exit yes
Crosswise: XX
exit yes
Selected aspirating speed
(1 - 5
[
8 or 12 way manifold
]
or 1 - 3 (16 way manifold or 384 Well
Manifold)
The speed of the aspirating pump.
Selected setting for crosswise aspiration
Plate type
Flat bottomed
Plate type
Round bottomed
Selected operating mode
(strip or plate)
Select required process step to be shown
using
-
and
+
keys or press
yes
to step
through all steps and settings
C:1 P:1 XXXX
- + Exit yes
Mode: Xxxxxx
exit yes
Sel. Strips: XXX
exit yes
Selected setting for strip selection
The speed of the dispensing pump.
If printer option fitted, select if
parameters are to be selected or not.
Show XX:yyyyyyy
- + other yes
Select required program to be
shown
Print List now ?
YES NO
Show XX:yyyyyyy
- + other yes
May 2003
Instructions for Use for Columbus Washer No. I 109 006 Rev No. 2.2
5-7
