TBEA TC500K3US-O Скачать руководство пользователя страница 49

Страница: 49 / 100

TC500K3US-O Installation Instructions

7 Equipment Installation

This chapter describes the process of installing the TC500K3US-O

inverter, including the method of transportation, demolition of the package on

the site and fixation.

7.1 Equipment Transportation

This section describes the preparatory work and basic requirements

needed in the transportation of the equipment, also includes the precautions

required during the course of transporting or handling the inverter.

7.1.1 Precautions

The links mentioned in the following contents are required to be noted

during the transportation of the inverter all the time, avoiding any hazards and

accidents that may occur during the transportation.



All staff must wear proper safety protection equipment.



The minimum load-bearing requirements of at least 2300kg must be

provided for all transporting and handling ways.



Enough space distance shall be always kept during the

transportation.



The equipment shall be close to the ground as far as possible during

the transportation.

Содержание TC500K3US-O





































































































Результаты поиска

Содержание TC500K3US-O

Отзывы:

Бренды по названию

Популярные бренды

TBEA TC500K3US-O, Руководство по установке

Результаты поиска

Содержание TC500K3US-O

Отзывы:

Бренды по названию

Популярные бренды