Taylor-Dunn ET-015-00 Скачать руководство пользователя страница 98

Страница: 98 / 166

Maintenance, Service, and Repair

Tires and Wheels
Page 4

Pattern for tightening the wheel nuts

Do not attempt to repair a tire with a damaged side wall or a slice in

the tread. This type of repair could fail prematurely resulting in severe

bodily injury and/or property damage.

Re-torque all wheel nuts to their final value after 1-week (20-hours)

of operation. Failure to re-torque the wheel nuts may result in the

wheel coming off of the vehicle causing severe bodily injury and/or

property damage.

REPAIR THE TIRE (PNEUMATIC)

NOTE: To properly repair a puncture, the tire must be removed from the wheel. Refer to

Replace the

Tire

section for information on removing the tire from the wheel.

It is recommended to repair a tire with a combination vulcanized plug and internal patch.

Tire repairs should only be performed by personnel trained in tire repair.

The tire repair procedure will be unique to the type of repair equipment or repair components used. Refer to
the instructions provided with your equipment or repair components.

4-Bolt Pattern

5-Bolt Pattern

8-Bolt Pattern

Содержание ET-015-00







































































































































































Результаты поиска

Содержание ET-015-00

Отзывы:

Похожие инструкции для ET-015-00

Бренды по названию

Популярные бренды

Taylor-Dunn ET-015-00, Руководство по эксплуатации, устранению неисправностей и замене запасных частей

Результаты поиска

Содержание ET-015-00

Отзывы:

Похожие инструкции для ET-015-00

Бренды по названию

Популярные бренды