Tascam TM-D4000, Руководство пользователя

Страница: 58 / 108

9 - Machine Control—General parameters
9–4
2
While holding down this key, also press and
hold down the
CLR key of the numeric key-
pad
[41]
.
3
While holding down these two keys, press the
key of the number keypad corresponding to
the memory where the setting is to be stored
(0 through 9).
A pop-up window will appear, showing that
the Machine Control Mapping setting has
been saved.
NOTE
The machine control screen does not have to
be displayed for this operation.
To recall a machine control mapping memory:
1
Press and hold down the
MACHINE SELECT
key [39] .
2
While holding down this key, press the key of
the number keypad corresponding to the
memory to be recalled (0 through 9).
A pop-up window will appear showing that
the Machine Control Mapping setting has
been recalled.
9.1.5 Showing current Machine Control
mappings
1
Press and hold down the SHIFT key [5] .
2
While holding this key down, press the
MACHINE SELECT key [39] .
The display will show a list of all the cur-
rently-stored Machine Control Mappings.
3
To dismiss this popup list, press the ENTER
key.
9.1.6 Automatically creating a list of
machine control mapping memories
When up to sixteen controllers have been added to
the machine control list from the list of supported
devices, you can create a list of machine mapping
memories, each of which provides a transport con-
troller for the different remote devices connected to
the TM-D4000, using the following procedure:
1
Set up the
CHASE
,
SCR
and
REC
fields
as needed.
2
Press and hold down the
SHIFT
key
[5]
.
3
While holding down this key, press and hold
down the
CLR
key
[41]
.
4
While holding down these two keys, press the
MACHINE SELECT
key
[39]
. The machine
control mapping list will be automatically
created from the list of machine entries and
shown on screen.
Memory 0 is the current setup, and the other
memories are then stored in order following
this,
9.2 General parameters
When the
SHIFT
indicator is lit, press the
MIDI/MC
key until the following screen appears:
Use the cursor keys to navigate to the options in the
MACHINE CONTROL
section, and the
ENTER
key to set parameters.
9.2.1 Edit Frames
When this is set on, location memories, etc. are
edited to frame accuracy. When it is set to off, loca-
tion is made to second accuracy.