manualshive.com logo in svg

Tascam TM-D4000, Руководство пользователя

Поделиться
Скачать
Tascam TM-D4000 Скачать руководство пользователя страница 37

 

6–1

 

6 - Surround modes

 

Because the TM-D4000 is capable of mixing to sev-
eral different surround modes, some of the operations 
and display screens are slightly different from the 
“normal”, stereo mode, as explained here.

Some of these operations are also explained in other 
parts of the manual, but are gathered here for easy 
reference.

In all cases where a surround mode is selected, the 
output busses are used to control the levels of the sig-
nals sent to the different channels of the surround 
matrix.

 

6.1 Selecting a surround mode

 

This selection is made through the 

 

OPTION 

SURROUND

 

 screen:

 

1

 

Make sure the 

 

SHIFT

 

 indicator is off, and 

press the 

 

OPTION

 

 key 

 

[5]

 

 until the following 

screen is shown:

 

2

 

Use the cursor keys and the 

 

ENTER

 

 key to 

highlight and select the stereo mode or a sur-
round mode from the following:

A popup screen will appear, allowing you to 
confirm the new setting, or cancel it:

A plan view of the speaker layout is shown on 
the display screen.

Note that in the 5.1 screen, the two rear 
speakers can be selected as a single mono 
output.

 

6.1.1 Selecting a buss pattern

 

As mentioned earlier, the output busses are used to 
control the levels of signals sent to the surround 
matrix channels.

In this context, they can be regarded as “super-stereo 
master” controls.

The assignment of the busses to the channels is 
shown by a number beside the representation of the 
on-screen speakers.

The surround buss assignments below each surround 
mode type allow the assignment of different buss pat-
terns to the surround channels. Where a channel does 
not exist as part of a surround mode pattern, it is rep-
resented by a dash (–).

 

STEREO

One left and one right speaker, output through the 
stereo output buss

2 + 2

One front left speaker and one front right speaker, 
with a pair of rear speakers (left and right)

3 + 1

A pair of front left and right speakers, together with a 
front center speaker and a center rear speaker

5 . 1

A pair of front left and front right speakers, with a front 
center speaker. A pair of rear left and rear right 
speakers is also provided, as is a sub channel (typi-
cally placed front center)

 

Surr

ound mode

Buss Assign 

T

ype

Output buss used for:

Fr

ont Left

Fr

ont Center

Fr

ont Right

Rear Left

Rear Center

Rear Right

Sub

 

2+2

 

1

1

—

2

3

—

4

—

2

1

—

3

2

—

4

—

3

1

—

4

2

—

3

—

4

1

—

2

4

—

3

—

Содержание TM-D4000













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды