TANDBERG E5780, Справочное руководство

Страница: 4 / 298

Preliminary Pages
Page iv Reference Guide: evolution 5000 E5780 and E5782 Encoder
ST.RE.E10135.4
About this Reference Guide
This Reference Guide provides instructions and information for the installation and operation
of the Encoder.
This Reference Guide should be kept in a safe place for reference for the life of the
equipment. It is not intended that this Reference Guide will be amended by the issue of
individual pages. Any revision will be by a complete reissue. Further copies of this Reference
Guide can be ordered from the address shown on page viii. If passing the equipment to a
third-party, also pass on the relevant documentation.
Issues of this Reference Guide are listed below:
Issue Date Build Version Comments
1 Nov 2003 3.3.0 Initial release.
2 Mar 2005 3.6.0 Enhanced functionality and options.
3 Jan 2006 3.9.0 Includes functionality of SVs 3.7.0, 3.8.0 and 3.9.0.
New option modules.
4 June 2007 3.11.0 Includes functionality of SVs 3.10.0 and 3.11.0.
NOTE…
The Build Version in the table refers to an overall number which encompasses all the various
software/firmware versions of video, audio, etc in the Base Board.
The following Publications are also associated with this equipment:
•
ST.US.E10135: User Guide
•
ST.TS.SNMP.E10074: Simple Network Management Protocol
•
ST.TS.E10074: Remote Control Protocol
•
ST.AN.1094: Video Noise Reduction and Compression
•
ST.AN.1110: Near Loss-less MPEG Concatenation Without Helper Signals
•
ST.AN.BW.E10074: Variable Bandwidth Feature of E57xx Encoders
Nomenclature
The terms RS-232 and RS-422 have been superseded by EIA-232 and EIA-422. However,
because the original names are inscribed on the Encoder the original terms are used in the
text of this Reference Guide.