TANDBERG E5780, Справочное руководство

Страница: 157 / 298

Operating the Equipment Locally — Mux Menu
Reference Guide: evolution 5000 E5780 and E5782 Encoder Page 4-79
ST.RE.E10135.4
Selected Item Options Description
Spare bitrate
Input bitrate
Output bitrate
Host TS Output Rate
Host Data Rate
Input TS 1 (188)
Data Rate 1 (188)
Input TS 2 (188)
Data Rate 2 (188)
Input TS 3 (188)
Data Rate 3 (188)
Software Release
These options are status only and cannot be changed.
The maximum input bitrate allowed on the Remux Module ASI inputs is 50 Mbit/s. If the input bitrate
exceeds 86 Mbit/s it will be incorrectly reported as a lower rate.
4.9.4 1.Service/2.Service Menu
When the Remux option module M2/EOM2/REMUX is fitted, there is an additional item (
Host
Bitrate
) in the
Mux Menu
and a further
Remux Module Menu
and
1.Service Menu
.
Table 4.31: 1.Service/2.Service Menu Options
Selected Item Options Description
Off The service is not included in the output.
On The service is included in the output, unscrambled.
On (RAS) The service is included in the output, scrambled and using RAS.
On (BISS Mux Key) The service is included in the output, scrambled and the Session Word
entered in the
Mux Menu
.
On (BISS Mode 1) The service is included in the output, scrambled, using BISS Mode 1 and the
Session Word entered in this menu.
Output:
This option enables the Output to
be set.
On (BISS-E) The service is included in the output, scrambled, using BISS-E and the
Enc(rypted) Session Word entered in this menu.
0 Host Encoder.
Source (BNC):
This option indicates the source of
the input. It is for status only.
1, 2, 3 Remux inputs 1 to 3.
Short Name In:
This option allows the Short Name
In to be changed.
This option is only shown in ATSC mode.
Short Name Out:
This option allows the Short Name
Out to be changed.
This option is only shown in ATSC mode.
Name (In):
This option indicates the input
service name. It is status only and
cannot be changed.
This option is only shown on an incoming Service menu (2-13.Service Menu).
Name Out:
This option allows the service
output name to be changed.