TANDBERG E5780, Справочное руководство

Страница: 91 / 298

Operating the Equipment Locally — System Menu: Service Info Menu (Syntax = ATSC)
Reference Guide: evolution 5000 E5780 and E5782 Encoder Page 4-13
ST.RE.E10135.4
Selected Item Options Description
Off
On streams 1, 2, 3, 4
On streams 1, 2, 3
On streams 1, 2
DVB Subtitles:
DVB Subtitle mode is provided for
subtitles to be added to the locally
encoded service only.
On stream 1
Only available when M2/EOM2/REMUX is purchased and option Remux
Input n = DVB Subt.
The Encoder includes a PES Private Data component entry in the PMT and
include the VBI_data_descriptor and Subtitle descriptor within this component
definition in the PMT for each of the 1 to n DVB Subtitle streams.
The Encoder does not check that the incoming stream actually contains DVB
subtitle data nor whether the user-entered subtitle PID corresponds to the
incoming stream. It is not possible to add subtitles to services arriving on a
remux input.
Only available when Remux Input n Mode is set to DVB Subt.
4.4.3 Service Info Menu (Syntax = DVB)
The
Service Info Menu
is selected from the
System Menu
by pressing the Service Info
softkey. This menu provides options for configuring the Service Information (SI) parameters
transmitted in the output transport stream.
The options available depend on whether the syntax is set to DVB or ATSC. See Figure 4.4
for the menu structure and Table 4.4 for option descriptions when the Syntax option has been
set to DVB.
For information regarding DVB Service Information refer to ETSI EN 300 468 Digital Video
Broadcasting (DVB); Specification for Service Information (SI) in DVB Systems.
Path: Summary Screen [More]> Setup> System> Service Info
Table 4.4: Service Info Menu (Syntax = DVB) Options
Selected Item Options Description
Network Name:
Enter the Network name.
The information is included in the Network Information Table (NIT).
Service Provider:
Enter the Service Provider name.
The information is included in the Service Description Table (SDT).
Service Name:
Enter the Service Name.
The information is included in the Service Description Table (SDT).
ATSC Advanced Television Standards Committee.
Syntax:
Specify the syntax.
DVB Digital Video Broadcasting.
Off Cuts the ASI input and leaves the PID mapping the same or deleting all PID
mappings.
Service Selects the current default mode where services are detected and remuxed.
DVB Subt This mode is provided for subtitles to be added to the locally encoded service
only. It is not possible to add subtitles to services arriving on a remux input in
this way.
Selecting this mode displays the DVB Subtitle option.
Data If at least one input is set for Data, ensure that the PSI and SI information is
correct. Usually, this means turning the “SI Level” to “Off (Ext.PSIP/PSI)” and
one of the remux inputs would be receiving all PSI and PSIP.
Remux Input n in:
Where n=1 to 3 to designate the
three inputs. See Annex J, Setting
of the Remux Card for Data/PSIP
and DVB-Subtitles Input for details
on setting up these modes.
Only available when
M2/EOM2/REMUX is purchased.
If selected for input n, two menu entries appear Input n PIDmin and Input n PIDmax. Defaults are
0x1FD0 and 0x1FFE. This specifies the range of PIDs that is mapped through for that input.