TANDBERG E5780, Справочное руководство

Страница: 24 / 298

Installing the Equipment
Page 2-4 Reference Guide: evolution 5000 E5780 and E5782 Encoder
ST.RE.E10135.4
2.2 Preliminary Checks
2.2.1 Mechanical Inspection
When taking delivery of an Encoder, check the equipment items delivered against the
enclosed delivery note. Inspect the equipment for damage in transit. If in doubt, contact
Customer Services (see
Preliminary Pages ).
NOTE…
Do not remove the covers of this equipment as doing so may invalidate any warranties, cause a safety
hazard and/or affect the EMC performance. It may also invalidate any safety tests. Check with
Customer Services beforehand.
2.2.2 Moving the Equipment Safely
Do not place this product on an unstable cart, stand, bracket, or table. The
product may fall, causing serious injury and serious damage to the product.
Use only with a cart, stand, bracket or table recommended by TANDBERG
Television.
An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart combination to overturn.
Do not move or carry the equipment whilst it is still connected to the supply or other leads, is
live or is in operation.
2.3 Installing the Equipment
2.3.1 Fixing Method
The Encoder can be operated mounted in a 19-inch rack. Ensure that it is firmly and safely
located and has an adequate through-flow of air.
Slide the Encoder onto the chassis supports and affix to the rack by means of an M6 x 18 mm
panhead screw in each corner (see
Figure 2.1 ).
Do not use this product as a support for any other equipment.
Figure 2.1: Fitting the Encoder into a Rack
Insert screws here to attach
Encoder to rack.
Repeat at the opposite side of
the Encoder.