TANDBERG E5780, Справочное руководство

Страница: 153 / 298

Operating the Equipment Locally — Mux Menu
Reference Guide: evolution 5000 E5780 and E5782 Encoder Page 4-75
ST.RE.E10135.4
Table 4.28 shows the options available for each standard in alphabetical order as are the
option descriptions shown in Table 4.29. This will help easy access to information.
Table 4.29: Mux Menu Options
Selected Item Options Description
BISS Entry Key
BISS Firmware:
Shows the BISS Firmware version.
It is for status only and cannot be changed.
BISS Hardware:
Shows the BISS Hardware version.
It is for status only and cannot be changed.
BISS is implemented according to Tech 3290 March 2000 and BISS-E is
implemented according to Tech 3292 April 2001.
BISS-E Injected Id:
This option is an identifier for the
unit.
This option is only used with BISS-E and comprises a 56-bit hexadecimal
word.
CAUTION…
Take precautions to avoid general knowledge of the
BISS-E Injected Id.
bitrate (188):
Min: 0.0000 Mbit/s
bitrate (204):
Max (without Remux):
110.0000 Mbit/s
Max (with Remux):
50.0000 Mbit/s
Step Size:
0.0001 Mbit/s
Both the bitrate (188) and the bitrate (204) can be in the range of 0 Mbit/s to
110 Mbit/s.
Changing the bitrate affects the automatic video bitrate and video resolution
calculations.
If the specified bitrate is outside the valid input range, a confirmation screen is
displayed which shows the maximum/minimum value allowed.
Multiplexer output bitrate when in
baseband output format and ASI
output mode.
If the Packet Length option is set to 188 bytes then only the bitrate (188) option is displayed. If the
Packet Length option is set to 204 bytes then both the bitrate (188) and bitrate (204) options are
displayed.
Local Oscillator The system clock is derived from the local oscillator.
HSYNC (External) The system clock is locked to the HSYNC input.
Video The system clock is locked to the video source.
Earlier versions of HD Encoder do not support this option and it is unavailable
in the menu structure. A hardware modification is required to implement it.
Clock:
Set the Clock reference source.
This option indicates the origin of the clock. It must be set to a video or external source before attempting
to change the clock value or it will default to Local Oscillator.
An Enc(rypted) Session Word is a 64-bit number that is transformed by the
Encoder into a Session Word used to encrypt and decrypt the transport
stream.
Enc Session Word:
This option is used with BISS-E.
CAUTION…
Take precautions to avoid general knowledge of the Encrypted Session Word.
FPGA Firmware:
This option indicates the version of
the FPGA Firmware.
It is for status only and cannot be changed.