TANDBERG E5780, Справочное руководство

Страница: 88 / 298

Operating the Equipment Locally — System Menu
Page 4-10 Reference Guide: evolution 5000 E5780 and E5782 Encoder
ST.RE.E10135.4
Path: Summary Screen [More]> Setup> System
Figure 4.4: Menu Hierarchy – Setup/System Menu
— Setup Password
— Current Password
— Display Errors
— O/P Status
— System Control
— Action on PID Error
— SNMP Control
— Display Contrast
— No. Services
4
…
— Mbd.Services PIDs
4
— Reset On Download
— Reset Encoder
— Short Channel Name
— Long Channel Name
— Syntax
— Remux input 1 mode
6
— Remux input 2 mode
6
— Remux input 3 mode
6
— SI Level
— Ext PSIP Source
— PSIP Status
— PSIP Min PID
— PSIP Max PID
— Data 1 min PID
6
— Data 3 max PID
6
— Major Channel
— Minor Channel
— Program Number
— Service Type
— Transport Stream ID
— Program Paradigm
— PMT PID
— Broadcast Flag
— Daylight Saving
— DST Start Date
— DST End Date
— DVB Subt
5
— Model Number
— Config Name
— Local Time
— Local Date
— UTC Offset
— GPS UTC Offset
— Temperature
— Screen Saver
— Keypress Beep
— Power Dip Recovery
— Upgrade Encoder
— Software Release
— Fan Control
— IP Address
— MAC Address
— Network Mask
— Gateway Address
— SNTP Server
— Set Community Name
— SNMP Master
— Last SNMP Master
— Last SNMP Poll
— SNMP Trap IP 1
— Trap Level Report
— Browser User Name
— Ethernet Bandwidth
— SABus Address
— Serial Protocol
— SABus Baud Rate
— SABus Data Bits
— Serial Menu Remote Control
System
Menu
Service Info....
Remote Control....
General....
Advanced....
Dig Program Insertion (DPI)
7
Mbd Services
3
…
Build....
Quit
Remote
Control
Menu
Setup
Menu
Shaded options are showing status and cannot be changed.
1
Logical Channel only shown if Logical Chan Desc = On.
2
Network and Service Ids not shown if the Encoder is set to
generate PSIP externally or is under MEM/nCC control.
3
Mbd Services… only available when No. Services > 1.
4
No. Services… option only available when Syntax = DVB.
5
DVB Subt only displayed when Remux Input n Mode is set to
DVB Subtitle.
6
Remux Input n mode and Data n min PID options are only
available when M2/EOM2/REMUX is purchased.
7
Digital Program Insertion (DPI) is only available when
M2/ESO2/DPI licence is purchased.
8
Under Mbd Services, Video (0134h) only available in SD mode.
Build
Menu
Build Version
Model Number
PCB Serial Number
Box Serial Number
Board Ref.
PCB Issue
H/W Mod Strike
F/W Release
S/W Release
S/W Build Date
General
Menu
Mbd
Services
Menu
3
[Additional] Service…
[First] Service…
These menus are mainly for
TANDBERG Television use for testing
purposes.
The Mdb Services and Default Service
menus are only available if, in the
Advanced Menu, the number of Services
is set to more than one.
Default
Service
Menu
Scramble
Name
Service ID
Logical Channel
Service Type
Enc Session Word
Session Word
PMT PID
PCR PID
Video (0134h)
8
Data A – RS232 (0121h)
Data B – RS422 (0121h)
Service
Info
Menu
Menu options
depends on Syntax selected
DVB
ATSC
— Network Name
— Service Provider
— Service Name
— Syntax
— Remux input 1 mode
6
— Remux input 2 mode
6
— Remux input 3 mode
6
— SI Level
— Data 1 min PID
6
— Data 3 max PID
6
— Network ID
2
— Service ID
2
— Transport Stream ID
2
— Service Type
— PMT PID
— Stream ID Descriptor
— Dolby AC-3 Descriptor
— Logical Chan Desc
— Logical Channel
1
— DVB Subt
5
There are further
screens of option
information available.
Advanced
Menu