background image

MOUNTING

A.  Attach the Supplied Mounting Bracket.

B.  Mount the CEN-NVS100 to a Wall or to a Rack. 

CEN-NVS100

CEN-NVS100

Network Video Streamer

1

©2009 Specifications subject to
change without notice.

 

e

di

u

t

r

at

s

k

ci

u

q

www.crestron.com

888.273.7876

201.767.3400

QUICKSTART DOC. 6746A (2022586)    03.09

(

4) Drywall Screws,

(Not Supplied)

Installing the CEN-NVS100

Configuring the CEN-NVS100

NOTE:

  The CEN-NVS100 must be installed in a temperature-controlled environment ranging from 

32° to 104° F (0° to 40° C).

 

Wall Mounting: 

                                                 

Rack Mounting:

Rack Mount Screws

(Not Supplied)

Mount the left or right side 
of the bracket to the front or 
rear rail of a rack (mounting of 
right side of bracket is shown). 

 

CONNECTIONS

 

P =  (For factory use only)

 C 

Common

 I 

Digital 

Input

 O 

Digital 

Output

 + 

RS-485, 

T+/R+

 – 

RS-485, 

T-/R-

   

12V    DIO    485

P   C    I    O   +  

(Front) Video Connection

 

If necessary, use the supplied 
BNC-to-RCA adapter to connect 
to the camera.

(Rear, Optional) 6-pin Terminal Block Connection

Using the supplied terminal block mating connector,
connect the 6-pin terminal block to external devices 
such as an alarm, sensor, and PTZ camera.

NOTE:

  By default, 

the CEN-NVS100 
uses DHCP.

Connection to 
Third-Party PoE 
Power Source. 

For installation 
information, refer to 
the third-party device 
documentation.

(For Factory Use Only)

Connection to Crestron PoE Switch
(Part No. CEN-SW-POE-5 Shown)

(Rear) Power over Ethernet (PoE) Connection

Connection to Crestron

®

 PoE Injector 

(Part No. PWE-4803RU)

For Future or Factory Use Only

 

(For Future Use)

1

2

A.  Access the Configuration Web Pages.

 

1.  In the Device Discovery Tool of Crestron Toolbox™, 

  

select 

Crestron CEN-NVS100.

 The home page of the 

  

CEN-NVS100 

opens.

 

 

2. Select 

Configuration.

 The “System” configuration page 

 

 

opens (refer to Step B).

CEN-NVS100 Home Page (Default)

D. Configure 

Network 

Settings.

 

1. Click 

Network.

 The “Network” 

 

  configuration 

page 

opens.

 

2.  Configure a static IP 

 

  address 

and 

related 

 

  network 

information.

 3. 

Click 

Save.

“System” Configuration Page

B.  (Optional) Configure System Settings.

1.  On the “System” configuration page, modify the default host 

name, 

CEN-NVS100

, using a name that is meaningful for 

your environment.

 

2.  Configure DI (Digital Input) and DO (Digital Output) settings. 

 3. 

Click 

Save.

C. Configure 

Security 

Settings.

1. Click 

Security.

 The “Security” configuration page opens.

 2. 

In 

the 

Root Password

 pane, assign an administrator password

 

  

and then click 

Save

 at the bottom of the pane. A log-in 

 

  window 

appears.

 3. 

Enter 

root

 as the user name, and then enter the password you 

entered in step 2.

 4. 

In 

the 

Add User

 pane, create a user account whose user type 

 

  

is set to 

Viewer

, and then click 

Add.

 

“Security” Configuration Page

“Network” Configuration Page

E.  (Optional) Configure Camera Control Settings.

1. Click 

Camera Control.

 

 

  The 

“Camera 

Control” 

 

  configuration 

page 

opens.

 2. 

Click 

PTZ Camera

 

  

and then configure 

 

  the 

camera 

settings 

 

  as 

required.

 3. 

Click 

Save.

“Camera Control” Configuration Page 

(

4) Screws, M3 x 5mm

Phillips Flat Head

(Supplied)

Mounting Bracket

All brand names, product names and trademarks
are the property of their respective owners.

Отзывы: