Tandberg Data FC420 Bridge Option User’s Guide
Document T6423053-01, Ver. 1, Rel. 0
November 2002
24
FC420 Services Software Commands
VerboseMode
Sets the Command Line Interface to
display extended information about a
parameter when the
help
command is
given. When verbose mode is enabled,
parameter values are generally
preceded by labels in responses to the
get
commands. Only the parameter
value is output when verbose mode is
disabled.
enabled
set verbose [enabled |
disabled]
get verbose
Virtual Drive Response
Enables/disables the virtual drive
response feature, which allows the
Fibre bridge to provide proxy
responses to SCSI INQUIRY and TEST
UNIT READY commands in the event
of a SCSI device selection time-out or
busy event.
disabled
set virtualdriveresponse
[enabled | disabled]
get virtualdriveresponse
XCDevices
Displays information about the devices
used in a specified Extended Copy
command. The
cmdnumber
variable is
obtained using the
xcstatus
command.
This command returns the following
information: device type, vendor ID,
product ID, serial number, and data
direction.
get xcdevices [
cmdnumber
]
XCError
Retrieves any SCSI sense data returned
by an Extended Copy command as the
result of an error.The
cmdnumber
variable is obtained using the
xcstatus
command.
This command returns the following
information: SCSI status, sense key,
ASC, and ASCQ. If a device involved
in the command’s data transfer also
returned sense data, the device ID
(serial number) along with sense data
for the device will be displayed.
get xcerror [
cmdnumber
]
Command
Description
Default
Syntax