Tandberg Data FC420 Bridge Option User’s Guide
Document T6423053-01, Ver. 1, Rel. 0
November 2002
14
FC420 Services Software Commands
Command Syntax
0
The following is a list of syntax used to describe command lines:
• [ ] indicates required entry
• < > indicates optional entry
• | indicates choose one entry
List of Abbreviations
0
The following is a list of abbreviations used to describe command
lines:
• fpFibre Channel port number (0 - 2)
• flFibre Channel LUN (0 - 31)
• sbSCSI bus number (0 - 3)
• stSCSI target ID (1 - 15)
• sl SCSI LUN (0 - 7)
Command Listing
0
A list of the currently available FC420 Services Software commands is
shown in
table 1
.
Table 2 Most Common
FC420 Services
Commands
Command
Description
Default
Syntax
AutoMap (Immediate)
Automatically maps all currently
operational SCSI devices attached to
the FC420 Fibre bridge.
automap
BootFibreDelay
Selects/displays the boot fibre delay
(in seconds).
0
set bootfibredelay [0 | 15 |
30]
get bootfibredelay
BootScan
Enables/disables the boot scan feature.
This feature provides dynamic
mapping of SCSI devices to fibre port/
lun combinations via a SCSI port at
boot time.
disabled
set bootscan [enabled |
disabled]
get bootscan
BootScanPorts
Selects/displays the ports to be used
for a boot scan.
auto
set bootscanports [
fp
] | [all] |
[auto]
get bootscanports
ClearEvent (Immediate)
Clears the contents of the event log.
clearevent