Tandberg Data FC420 Bridge Option User’s Guide
Document T6423053-01, Ver. 1, Rel. 0
November 2002
FC420 Services Software Commands
15
DhcpFixedDelay
Selects/displays the delay interval (in
seconds) between DHCP client
requests.
0
set dhcpfixeddelay [0-255]
get dhcpfixeddelay
DispEvent
Sets the switches that controls the filtering performed when
displaying events. Switches have the following settings:
[
subsystem
]
switch: mask that controls which subsystem events
are displayed. The mask is a byte value with the following bit
patterns corresponding to the currently supported subsystems:
0x01
FCP Processor /i960
Interaction
0x02
SCSI Processor/i960
Interaction
0x04
Ethernet (Future)
0x20
NVRAM & Flash
To display the events from several different subsystems, use a
mask value equal to the logical OR of the corresponding
subsystem values. To display events from all subsystems enter
the value 3Fh for the mask.
[
event_level
]
switch: mask that controls what reporting level
events are displayed. The mask is a byte value with the following
bit patterns corresponding to the currently supported reporting
levels:
0x01 Info; general information
0x02 Warning; unexpected situation/condition
0x04 Critical; operation limited/curtailed
0x08 Failure; hard failure
0x10 Other; otherwise not categorized
0x20 Debug; tracking events
To display events from several different reporting levels, use a
mask value equal to the logical OR of the corresponding
reporting levels. To display events for all reporting levels enter
the value 3Fh for the mask.
[
status
]
switch: has the following two values which correspond
to the status of the events to be displayed:
all: All events, regardless of their status values are displayed.
ngood: Only events with a status other than good are displayed.
0x00
0x00
ngood
set dispevent [
subsystem
]
[
event_level
] [
status
]
get dispevent
DispFcPortDB
(Immediate)
Displays the contents of the specified
Fibre port’s internal database.
dispfcportdb <
fp
>
Command
Description
Default
Syntax