Tandberg Data FC420 Bridge Option User’s Guide
Document T6423053-01, Ver. 1, Rel. 0
November 2002
FC420 Services Software Commands
21
Reserve (Immediate)
Reservation of the FC420 is implicit; once the configuration
image is changed by any user of services (Serial/Ethernet/Etc.,)
the FC420 becomes RESERVED. Performing a
SaveConfiguration, RestoreConfiguration or FcRestart
RELEASES the FC420 so that other devices may access it.
When the FC420 services interface is reserved,
set
commands are
unavailable, but
get
commands are available. Note that at least
one service interface always has access to the FC420 at all times.
This interface always reports a RELEASED status, since it may
issue
set
commands.
reserve
RestoreConfiguration
(Immediate)
Restore to factory default
configuration or the last saved
configuration. The new configuration
must be saved to take effect.
restoreconfiguration [default
| saved]
RouteChange
(Immediate)
Map a Fibre Channel port (
fp
) and
LUN (
fl
) to a SCSI bus (
sb
), target (
st
),
and LUN (
sl
). Valid route change
entries are:
fp
(0-2)
fl
(0-31)
sb
(0-3)
st
(0-15)
sl
(0-7).
routechange [
fp
] [
fl
] [
sb
] [
st
]
[
sl
]
RouteDisplay
List the currently mapped Fibre
Channel-to-SCSI routes.
routedisplay
routedisplay [
fp
]
routedisplay [online | offline]
routedisplay [
fp
[
fl
]]
routedisplay [
fp
[online |
offline]]
RouteOffline
Set the status of a route to offline.
set routeoffline [
fp
] [
fl
]
get routeoffline [
fp
] [
fl
]
RouteOnline
Set the status of a route to online.
set routeonline [
fp
] [
fl
]
get routeonline [
fp
] [
fl
]
Command
Description
Default
Syntax