5 6
T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A
For VoIP calls, use: [this number]
Select the number you want to display at the remote location when VoIP
calls are placed from this extension. If
Default VoIP number
is selected, the
phone number associated with the outgoing VoIP port is used. This selection
makes the most sense if your VoIP numbers have been configured to handle
all inbound calls the same way.
For <Service Provider> VoIP calls, use:
Figure 56: IP extension username and password
Phone Type
If you have a TalkSwitch phone connected to this extension, select the
model of phone. TalkSwitch sets have some integrated features that will not
work unless the proper phone is specified. Features include intercom paging,
group paging over the speaker, and message waiting counter on the TS-80,
TS-200, TS-400 and TS-600 phones.
For the IP extensions, TalkSwitch requires IP phones that have G.711 CODEC
support.
The IP phones officially supported by TalkSwitch are:
•
Polycom Series — 301, 430, 501, 601 (minor support differences
between models)
•
Grandstream — GXP-2000 (Excellent low budget phone)
•
Counterpath — Eyebeam soft client.
If a name was not recorded before you set up the associated voice
mailbox, pick up the handset, press
+ <mailbox number>
and press 4.
*
*
