LLEXETER.CO.UK
LLEXETER LTD - UNITS 15-18 GREENDALE BUSINESS PARK - WOODBURY SALTERTON - DEVON - EX5 1EW - UNITED KINGDOM
COMPANY NO: 4940600 / VAT REGISTRATION NO: GB825156925 TEL: 01395 233128
5. Tighten the steering stem crown bolt until the
steering bearings are correctly adjusted for free
turning movement, but no looseness in the bearings.
6. Tighten the remaining component bolts in the
following order;
Handlebar Mount - 15Nm
Top Yoke pinch bolt - 10Nm
Lower Yoke fork pinch bolts - 10Nm
(Torque settings apply to both RST and DNM fork
assemblies)
The remaining components can now be refitted to complete the service/repair.
4. Ensure the forks are correctly aligned
correctly aligned with the top
of the upper yoke and tighten the pinch bolts
pinch bolts to 7Nm
(RST and DNM)
2.3b Refitting
3 Rear wheel and Rear Suspension
Chapter Contents
3.1 : Rear Wheel and Drive removal, inspection and rebuilding
3.1a Rear wheel removal
3.1b Chain & Sprockets removal and refitting
3.2 : Rear Suspension removal, inspection and rebuilding
3.1a Rear Wheel removal
To remove the rear wheel, ensure the vehicle is safely
supported to raise the rear wheel from the ground.
Do not use the side-stand as part of the lifting
supports as this can cause damage or injury.
1. Remove the 2 bolts (M6 x 18mm) securing the
rear brake caliper to the swingarm.
When refitting, tighten to 10Nm and apply a
suitable thread locking agent.
