Takeuchi TB210R, Руководство оператора

Страница: 54 / 205

2-6
CONTROLS
1. Select a firm and level surface, set the
working equipment to the posture shown
in the diagram above, lower it to the
ground, and then stop the engine.
2. Raise the safety lock lever to the locked
position.
COVERS
3. Insert the starter key and turn it
counterclockwise to unlock the engine
hood (1).
4. Push in the key hole (2) with your thumb
and open the engine hood (1).
5. Open the engine hood (1) all the way until
it stops.
Closing
1. Close the engine hood (1).
2. Insert the starter key and turn it clockwise
to lock the engine hood (1).
ENGINE HOOD
• Before opening the engine hood, be
sure to stop the engine. If a hand or tool
becomes trapped in the rotating or
moving part, serious injury could result.
• Opening or closing the engine hood
while the engine is running may cause
the machine to move, resulting in
serious injury or death. Be sure to stop
the engine before opening or closing the
engine hood.
• Do not leave the engine hood open on a
windy day or if the machine is parked
on a slope.
• When opening or closing the engine
hood, be careful not to get your hands
or other parts of your body caught by it.
IMPORTANT: Before opening or closing
the engine hood, check if the boom is
offset to either side. If it is, set it in the
neutral position to avoid interference
between the main body and the hoe
attachment, and then fully extend the how
attachment to the ground.
If the engine hood is opened while the
hoe attachment is raised and the boom is
in its full swing position, the hoe
attachment could come into contact with
the main body.
Open the engine food to perform a
maintenance operation or to switch the
selector valve.
Opening