TAJIMA TEMX-C Series, Руководство пользователя

Страница: 18 / 242

Safety Precautions
5
1
2
3
4
5
6
7
8
9
10
11
Chapter 1
QS07
Prevent the operation noise in the environment.
This machine is designed to reduce noise during operation.
To improve the sound insulation performance in a factory
still more, use the interior finish materials which show high
sound insulating performance for the walls, ceiling, and
floor of the factory.
Install the machine on a sturdy floor.
The floor structure must be strong enough to bear the
machine weight (indicated on the spec. plate).
Avoid dust and moisture.
Since dust and moisture lead to dirt and rust on the
machine, use the machine in an environment of facility of
air conditioner, and clean the working place periodically.
Use caution not to expose the machine to direct wind from
the air conditioner so that embroidery threads do not
become disheveled.
Humidity:
30 to 95%RH (relative humidity) without condensation
Ambient temperature:
5 to 40°C (during operation), -10 to 60°C (during storage)
Avoid direct sunlight.
If the machine is exposed to direct sunlight over an
extended period of time, the machine body may be
discolored or deformed. Put curtains or shades to the site to
prevent the machine from direct sunlight.
Provide enough space for maintenance.
Taking account of workability when maintaining and
inspecting the machine, provide 50 cm or more working
area to right, left and rear directions of the machine against
obstacles such as walls.
Pay attention to interference of radio wave.
Although the machine is designed not to affect radio wave
interference to other equipments, there could be cases
where it causes interference depending on operation
environment and type of other equipment. If such problems
arise, install the equipment with a space from the machine
as big as possible.
!
CAUTION
50 cm
50 cm 50 cm