TAJIMA TCMX 601, Руководство пользователя

Страница: 71 / 130

7-6
Design data, memory processing
6.
Modify a Y data.
7.
Modify the function code.
Function code
: Stitch, JUMP: Jump, STOP: Stop, HIGH: High
speed, LOW: Low speed, ATH: ATH, SEQ: Sequin
Pressing [SET] will cause the cursor to move to the next
stitch (the 101st stitch in this example).
8.
Decide the modification.
Press the reset key ( ) twice.
The message for confirmation will be displayed.
9.
Set ......................................................................................End
When not executing (to stop):
Switching the screen
Main screen ....................
Other setting • operation.
4.
Data edit (insert)
Insert a stitch data to the design data that is stored in the memory.
1.
To call the screen......................................................
CAUTION
This operation will overwrite the original design data by
design data after edit. Therefore, store the original
design data into a floppy disk or memory card
according to need (p.7-9, p.7-12).
12
Example: 12 (mm)
Example: stitch
101
-40 -50
JUMP
Are you ready?
E
E
A D2 F1 F6
Perform insertion by one stitch unit.
Stitch data will be inserted just before the selected stitch
data.
!
Cursor
In case of red characters: data set design
1 Data Edit
List screen
Press ?
1 Data Edit
JZ07