TAJIMA TCMX 601, Руководство пользователя

Страница: 46 / 130

Functions that are frequently used
5-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
4.
Manual Color Change
This function performs color change manually.
1.
To call the screen......................................................
2.
To execute ......................................................... End
Pressing [SET] will cause the looper case and tension
base to move.
Main screen ..................
Other setting • operation
5.
Manual Thread Trimming
This function trims thread manually.
1.
To call the screen......................................................
2.
To execute ......................................................... End
Selecting will cause the warning buzzer to sound.
After thread trimming, “Needle height” will become H
(Retractable position).
Switching the screen
Main screen ..................
Other setting • operation
CAUTION
When performing this operation, do not have your
hands etc. access to the looper case or tension base.
You could be injured by the moving looper case or
tension base.
CAUTION
When performing this operation, do not put your
hands, etc. near needle or on the machine table. Since
needle bar will move up/down, you could be injured.
The looper case and tension base will slide.
When performing this operation in the middle of embroi-
dery, the machine will perform color change after thread
trimming.
When you perform embroidery as this setting is, set
“NO” to “Auto Color Change (AC)” (p.4-8).
!
a
The looper number that is currently selected will be dis-
played.
List screen
Press D1.
1 Manual Color Change
Example: d
a
d
E
A D2 F1 F6
Thread management after thread trimming:: p.10-3
!
List screen List screen
Press D1.
D1
2 Manual ATH
or
Manual Thread Trimming
Example: to execute
E
A D2 F1 F6
JZ07