TAJIMA TCMX 601, Руководство пользователя

Страница: 10 / 130

Warning and caution
1-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CAUTION
[Installation environment]
Do not transport, store, and operate the machine in the area of which altitude exceeds 1,000m.
Prevent the operation noise in the environment.
This machine is designed to reduce noise during operation. To improve the
sound insulation performance in a factory still more, use the interior finish
materials which show high sound insulating performance for the walls, ceiling,
and floor of the factory.
Install the machine on a sturdy floor.
The floor structure must be strong enough to bear the machine weight (indicated
on the spec. plate).
Avoid dust and moisture.
Since dust and moisture lead to dirt and rust on the machine, use the machine in
an environment of facility of air conditioner, and clean the working place
periodically. Use caution not to expose the machine to direct wind from the air
conditioner so that embroidery threads do not become disheveled.
Humidity: 30 to 95%RH (relative humidity) without condensation
Ambient temperature: 5 to 40
°
C (during operation), -10 to 60
°
C (during
storage)
Avoid direct sunlight.
If the machine is exposed to direct sunlight over an extended period of time, the
machine body may be discolored or deformed. Put curtains or shades to the site
to prevent the machine from direct sunlight.
Provide enough space for maintenance.
Taking account of workability when maintaining and inspecting the machine,
provide 50 cm or more working area to right, left and rear directions of the
machine against obstacles such as walls.
Pay attention to interference of radio wave
Although the machine is designed not to apply radio wave to other equipment,
there could be cases where it causes interference depending on operation
environment and type of equipment. If such problems arise, install the
equipment as apart from the machine as possible.
!
50cm
50cm 50cm
JZ07